Mizu Webphone - Mizu Voip

Text logs are sent to the following outputs:-status display (only level 1 –these are the most important events that needs to be displayed also for the user)-log window if loglevel is higher than 3-file if loglevel is higher than 3 (webphonelog.dat in the java user home directory which depends on the OS/java/browser used)-java console (if the logtoconsole applet parameter is set to true)Default is 1.logtoconsole(boolean)Whether to send tracing to the java console.Default is false.capabilityrequest(boolean)If set to true then will send a capability request (OPTIONS) message to the SIP server on startup. The serveraddress applet parameter must be set correctly forthis to work. This method is useful to release the security restrictions when using the applet with the java script API and also to open the NAT devices.Default value is false.natkeepalive(boolean)If set to true then will send a short message (\r\n) to the SIP server on startup. The serveraddress applet parameter must be set correctly for this to work. Thismethod is useful to release the security restrictions when using the applet with the java script API and also to open the NAT devices.Deprecated since v.3.8.2Default value is false.recaudiobuffers(number)Number of buffers used for audio recording.Default is 7.recaudiomode(number)Audio recording mode. 0 means default; 1 means event based; 2 means device poll.Default is 0.useencryption(boolean)Set to true for encrypted communication (both media and signaling)Works only with mizu servers.maxlines(number)Maximum port number from 1 to 4. When set to 1, multiline functionality will be disabled (but the webphone can have unlimited simultaneous calls).If you would like to reject all incoming calls if the webphone is already in a call, then use the “rejectonbusy” applet parameter instead of setting the maxlines to 1.Default value is 4.httpsessiontimeout(number)Maximum session time in minutesUsed when the webphone is controlled from java script to avoid situations when the java applet is still running but the user http session is already expired.You must call the API_register periodically (for example in every 20 minute) to avoid the timer expiry.Default value is 60 minute.