AT COMMAND SET HILO/HILONC MODULES - Libelium

page 165/3396.16. +CREG Command: Network registrationAT+CREG Network registrationTest commandSyntaxAT+CREG=?Response+CREG: (list of supported s)OKRead commandSyntaxAT+CREG?Response+CREG: ,[,,]OKExecute commandSyntaxAT+CREG=ResponseOKParameters:0: disable network registration unsolicited result code1: enable network registration unsolicited result code +CREG: 2: enable network registration and location information unsolicited result code+CREG: [,,]: 0: not registered, ME is not currently searching a new operator to register to1: registered, home network2: not registered, but ME is currently searching a new operator to register to3: registration denied4: unknown5: registered, roaming: string type; two byte location area code in hexadecimal format (e.g. "00C3"equals 195 in decimal):string type; two byte cell ID in hexadecimal formatReference[27.007] § 7.2Notes• Set command controls the presentation of an unsolicited result code +CREG: when =1 and there is a change in the ME network registration status, orcode +CREG: [,,] when =2 and there is a change of thenetwork cell.Note d’étude / Technical document :URD1– OTL 5635.1– 008 / 70248 Edition 07AT Command Set for SAGEM HiLo/HiLoNC Modules24/06/2009