AT COMMAND SET HILO/HILONC MODULES - Libelium

page 314/3397.4. +CPBW Command : Write phonebook entries 8. SMS AT COMMANDS8.3. +CMGD Command : Delete SMS message 8.4. +CMGF Command : Select SMS message format 8.5. +CMGL Command : List SMS messages from Preferred store 8.6. +CMGR Command : Read SMS message 8.7. +CMGS Command : Send SMS message 8.8. +CMGW Command : Write SMS message to memory 8.9. +CMSS Command : Send SMS message from storage 8.10. +CNMI Command : New SMS message indication 8.11. +CSCB Command : Select Cell broadcast message 8.12. +CSCA Command : SMS service center address 8.13. +CSMP Command : Set SMS text mode parameters 8.14. +CSMS Command : Select message service 8.15. +CPMS Command : Preferred message storage 8.16. +CSDH Command : Show text mode parameters 8.17. +CSAS Command : Save settings 8.18. +CRES Command : Restore settings 8.19. +CMT Command : Received SMSPP content 9. DATA AND FAX AT COMMANDS9.1. +CBST Command : Select bearer service type 9.2. +CRLP Command : Select radio link protocol parameter 9.3. +CR Command : Service reporting control 9.4. +FCLASS Command : Fax : Select, read or test service class 9.5. +FRM Command : Receive data 9.6. +FTM Command : Transmit data 9.7. +FRS Command : Receive silence 9.8. +FTS Command : Stop transmission and wait 9.9. +FRH Command : Receive data using HDLC framing 9.10. +FTH Command : Transmit data using HDLC framing 9.11. +FMI Command : Manufacturer identification 9.12. +FMM Command : Model identification 9.13. +FMR Command : Revision identification 10 GPRS AT COMMANDS10.1. +CGATT Command : PS Attach or Detach 10.2. +CGACT Command : PDP context activate or deactivate 10.3. +CGCLASS Command : GPRS Mobile station class 10.4. +CGDCONT Command : Define PDP context 10.5. +CGDATA Command : Enter data state 10.6. +CGEREP Command : GPRS event reporting 10.7. +CGPADDR Command : Show PDP address 10.8. +CGQMIN Command : Quality of service profile (minimum acceptable) 10.9. +CGQREQ Command : Request quality of service profile Note d’étude / Technical document :URD1– OTL 5635.1– 008 / 70248 Edition 07AT Command Set for SAGEM HiLo/HiLoNC Modules24/06/2009