AT COMMAND SET HILO/HILONC MODULES - Libelium

page 268/33913.7. UDP Specific Commands13.7.1. +KUDPCFG: UDP Connection ConfigurationAT+KUDPCFG: UDP Connection ConfigurationRead commandSyntaxAT+KUDPCFG?Response+KUDPCFG: ,,,[+KUDPCFG: ,,,[…]]OKWrite commandSyntaxAT+KUDPCFG=[],[,]Response+KUDPCFG: OKError caseNO CARRIER+CME ERROR: +KUDP_NOTIF: , Parameter: Index of the UDP session.: 0: Client1: Server: Numeric parameter (0-65535).: Index of a set of parameters for configuring one UDP session (seeKCNXCFG).If no value is supplied to the command line, the default connectionprofile is used.: Integer type. Indicates the cause of the UDP connection failure.0-Network error1-no more sockets available; max number already reached2-Memory problem3-DNS error5-UDP connection error(Host unreachable)6-generic error8-Data sending is OK but KUDPSND was waiting more or less characters9-Bad session IDReferenceSAGEM COMMUNICATIONSProprietaryNotes• For UDP socket in server mode, it is binded to a defined port number, incomingconnection are notified by KUDP_DATA.• Maximum is 200Note d’étude / Technical document :URD1– OTL 5635.1– 008 / 70248 Edition 07AT Command Set for SAGEM HiLo/HiLoNC Modules24/06/2009