AT COMMAND SET HILO/HILONC MODULES - Libelium

page 215/33910.8. +CGQMIN Command: Quality of service profile (minimum acceptable)AT+CGQMIN Quality of service profile (minimum acceptable)Test commandSyntaxAT+CGQMIN=?Read commandSyntaxAT+CGQMIN?Write commandResponse+CGQMIN: ,(list of supported s),(list of supporteds),(list of supported s),(list of supported s),(list ofsupported s)[+CGQMIN:...]OKResponse+CGQMIN: ,,,,,[+CGQMIN: ...]OKSyntaxAT+CGQMIN=[[,[,[,[,[,]]]]]]ResponseOK/Parameters::::numeric parameter for the precedence class0: network subscribed value1: High Priority Service commitments shall be maintained ahead ofprecedence classes 2 and 32: Normal priority Service commitments shall be maintained aheadof precedence class 33: Low prioritynumeric parameter for the delay classnumeric parameter for the reliability class0: network subscribed value1: Non real-time traffic , error-sensitive application that cannot copewith data loss2: Non real-time traffic, error-sensitive application that can cope withinfrequent data loss3: Non real-time traffic, error-sensitive application that can cope withdata loss, GMM/SM, and SMS4: Real-time traffic, error-sensitive application that can cope withdata loss5: Real-time traffic, error non-sensitive application that can copewith data lossnumeric parameter for the peak throughput class0: network subscribed value 6: Up to 32 000 (256 kbit/s)1: Up to 1 000 (8 kbit/s) 7: Up to 64 000 (512 kbit/s)2: Up to 2 000 (16 kbit/s) 8: Up to 128 000 (1 024 kbit/s)3: Up to 4 000 (32 kbit/s) 9: Up to 256 000 (2 048 kbit/s)4: Up to 8 000 (64 kbit/s)5: Up to 16 000 (128 kbit/s)Note d’étude / Technical document :URD1– OTL 5635.1– 008 / 70248 Edition 07AT Command Set for SAGEM HiLo/HiLoNC Modules24/06/2009