AT COMMAND SET HILO/HILONC MODULES - Libelium

page 256/33913.5. FTP Client Specific Commands13.5.1. +KFTPCFG: FTP ConfigurationAT+KFTPCFG: FTP ConfigurationRead commandSyntaxAT+KFTPCFG?Response+KFTPCFG: ,,,,,Write commandSyntaxAT+KFTPCFG=[],[,[,[, [,]]]]ReferenceSAGEM COMMUNICATIONSProprietaryResponse+KFTPCFG:OKParameters: Index of a set of GPRS parameters for establishing one FTPsession(see KCNXCFG).: Index of the FTP session.: string type. Consists of a dot-separater numeric (0-255) parameterson the form a1.a2.a3.a4, to identify the ftp server or domain name ofthe server.: string type, indicates the user name to be used during the FTPconnection.: string type, indicates the password to be used during the FTPconnection.: numeric parameter (0-65535). Indicates the remote command port:(21 by default)numeric number. Indicates the initiator of the FTP connection.0 – actif. The server is initiator of the FTP data connection1 – passif. The client is initiator of the FTP data connection inorder to avoid the proxy filtrate. The passive datatransfert process “listens” on the data port for aconnection from the active transfert process in orderto open the data connection.Note that only passive mode is currently supported, active mode isinternally switched to passive.Notes• Execution command sets the server name, the login, the password, the portnumber and the mode for ftp operations.• Only one ftp session is currently supported, is always 0.Example :AT+KFTPCFG=0,"ftp.connect.com","username","password",21,0Note d’étude / Technical document :URD1– OTL 5635.1– 008 / 70248 Edition 07AT Command Set for SAGEM HiLo/HiLoNC Modules24/06/2009