AT COMMAND SET HILO/HILONC MODULES - Libelium

page 288/33915. MMS COMMANDS15.1. Command set overviewThe MMS commands are a set of dedicated commands to exchange object between a TE and a ME.AT+KMMCNFAT+KPSLAT+KPSRAT+KPSWAT+KPSDAT+KPSSENDAT+KPSCAPAT+KMMRETMMS ConfigurationList of objectsReading an objectWriting an objectDeleting an objectSend MMSRetrieving Capabilities of the mobileRetrieve MMS from MMS server+KMMA+KMMRECNotification : New MMS available on MMS CenterNotification : retrieve of MMS from MMSC (to ME)15.2. Automatic retrievalBy default, each time a new MMS is present on the MMSC, a notification is sent to the modem, that sentitself a notification +KMMA to the TE.Then, the modem retrieves automatically the new MMS : the MMS is got from the MMSC to the ME.When the retrieval is done, the ME send a notification +KMMREC to the TE.15.3. ExamplesThe procedure to configure the modem for MMS use is :• AT+KMMCNF to configure the modem• AT+KPSCAP to get the MMS capabilities of the modemThe procedure to send a MMS is :• AT+KPSW=? to check the space available for a new MMS• AT+KPSW to write a MMS onto the mobile• AT+KPSSEND to send this MMS on the network• AT+KPSD to delete this MMSNote d’étude / Technical document :URD1– OTL 5635.1– 008 / 70248 Edition 07AT Command Set for SAGEM HiLo/HiLoNC Modules24/06/2009