AT COMMAND SET HILO/HILONC MODULES - Libelium

page 277/33913.8.5. +KSMTPUL: Send MessageAT+KSMTPUL: Send MessageTest commandSyntaxAT+KSMTPUL=?Write commandSyntaxAT+KSMTPUL=,Response+KSMTPUL: , OKResponse+KSMTPUL: CONNECTThe ME wait for the data to be sentOK+CME ERROR: NO CARRIERParameters::::Numeric type. Indicates the transfer mode (header closed or not):1- Normal mode. The mail header is minimal, the user only send themail body. This is use for simple mails without attachment.0- Complex mode. The mail header minimal part is still handled bythe AT command but the header is not closed. The user isresponsible for completing and closing the mail header. This isuse for mails with attachment or complex headers.(cf. examples)Numeric type. Amount of data transferred within the CONNECTSee 2.7 Error codes for the SMTP transfer.Indicate the session id of current SMTP connection.ReferenceSAGEM COMMUNICATIONSProprietaryNotes• If the GSM or GPRS connection is not up, before uploading the file the ME willautomatically open the predefined GSM or GPRS link.• At the end of the SMTP transfer, whether it succeeds, the parameters associatedwith the current mail (recipients, subjects) will be set to the NULL value.• Hardware flow control(AT&K3) is required for serial link• User can use to stop transfer.See AT+KPATTERN.• The behaviour of DTR drop meet with AT&D• Using “+++” can abort sending data and using ATO[n] to return backNote d’étude / Technical document :URD1– OTL 5635.1– 008 / 70248 Edition 07AT Command Set for SAGEM HiLo/HiLoNC Modules24/06/2009