microport colibri X5 - Robust-pc.de

Getting Started3. To set up the device on a table, hold the narrow edge of the tablestand with the fingers of one hand at the bottom and the thumb ontop. With the other hand, hold the colibri X5 at an angle and guidethe bracket to the flat area on the bottom of the tablet PC (behindthe heat sink). The bracket is in the correct position when it touchesthe black cover of the heat sink. Now simply lower the tablet PC downfor the optimum setup.Figure 18 The table stand4. On delivery, the tablet pen is contained in a transport loop on theright side. In addition there is a stand-by loop in the rear. Be carefulwhen using the stand-by loop, as the projecting pen may causeinjuries.5. Now open the secret compartment of the case by pulling the strapat the top of the case lid (see section 4.3, False Cover). The "falsecover" comes down and the USB keyboard comes toward you. Youcan use it for more comfortable operation in your office environment.Take it out of the case and place it in front of (or next to) yourcolibri X5 on the table.6. Now you still need the USB adapter cable, which comes with thesystem. You will find it on the false cover, held by an elastic loop (seesection 19, Connectors on the Device).microport colibri X5 41