microport colibri X5 - Robust-pc.de

Using the PenThis is all fine until you sit at another workstation, which probably has adifferent mouse or a different screen resolution, a different mouse driver or adriver with different settings, etc. You are forced to readjust, but after a whileyou get used to the new conditions and can work properly again.Only later do you realise that the constant "adjustment process" the bodymust go through when using the mouse causes symptoms of fatigue. Usingthe mouse requires a great deal of concentration, especially in design work(CAD).11.2.2 (Modern) Pen OperationThe pen makes everything much easier, as the cursor (mouse pointer) ispositioned absolutely, regardless of the type of pen or screen resolution. Ofcourse the eye must find the target on the display, but this takes only aninstant, before the hand (and thus the pen) intuitively moves toward to thetarget.If you want, you can move the cursor with the pen by sliding or hovering thetip of the pen over the glass pane without pressure. This is similar to rollingthe mouse over a pad.Because of the relative movement, you cannot use the mouse without themouse pointer. In the case of the pen you do not need the mouse pointer atall (and can set it to transparent or deactivate it). You do not need it becausethe pen position is always the same as the cursor position - provided the penis calibrated properly (see section 12, Calibrating the Pen Input System).44To left-click with the pen:Simply touch the pane with the pen, and briefly apply pressure. That's it.When you use a mouse, your brain first has to "recompute" the movements of all handand finger joints and then activate the index finger via the appropriate forearm muscleand sinew. As this is strenuous, you will get tired earlier than when using a pen.To right-click with the pen:Opening a context menu, for example, is easy with the pen:microport colibri X5 59