microport colibri X5 - Robust-pc.de

Connectors on the DeviceThe function of the microport colibri X5 serial interface complies with thelatest PC standard.The maximum data rate is 115,200 Baud (bits per second). Since a 7-poleround connector (waterproof) is found on the colibri X5, in practice only themost common signals are used:Most commonly used signals:• RXD (Receive Data)• TXD (Transmit Data)• RTS (Request To Send)• CTS (Clear To Send)• DTR (Data Terminal Ready)• DSR (Data Set Ready)• GND (Ground)The serial interface is still used today with field instruments (e.g.: Tacheometer,leveller). The manufacturers of these high-quality measurement instrumentsuse different connectors. Therefore, you need a special adapter cablewhich, as a rule, must also be waterproof. For all of the most common instrumentswe have adapter cables in stock for you or we will make a customisedcable for you (see section 19.9, Customer-Specific Cables).19.7 PCMCIA SlotAbove right on the device you can find the PCMCIA slot, see also Figure 13.Here, the commercially available type-II cards (16 or 32 Bit) can be installed,which can be used for a variety of functions (extra memory, network, peripheralconnector).microport colibri X5 89