ManageEngine ADManager Plus :: Help Documentation

ManageEngine ADManager Plus :: Help Documentation
In case you use different port for RPC, use the Port Number in which your RPC is running
by replacing 135 in the above command.
Step 3: After executing the above command, open the "resultPorts.txt" from where the
command is executed.
Step 4: Find for all the "_tcp" in the "resultPorts.txt" (Ex :
ncacn_ip_tcp:100.190.1.2[1142])
Step 5 : The value in the Square Brackets[ ] are the ports which needs to be opened.
Make a note of these ports. (Ex: in the above result, 1142 is the port that needs to be
opened).
Step 6: Continue with the search until the file ends and open all the identified ports.
ZOHO Corp. 20