INSTALLATION GUIDE - Big Ass Fans

PIVOTPivoting the Fan211. Adjust pivot joint and lower yokeWARNING: Do not remove the bottom bolt of the pivot jointor the bottom bolt of the lower yoke.CAUTION: When the fan is pivoted, the motor should not belower than the gearbox (see pp. 16–17).WARNING: Before tightening the bolts, make sure the fanblades are clear of any obstructions including the safetycable and motor power cable.fan. Remove only one bolt at a time.40 ft·lb (54.2 N·m) usingsocket.AB2. Tighten bolts on upper yoke and balance jointcenter of gravity.Tighten the bolts to 40 ft·lb (54.2 N·m) socket.WWW.BIGASSFANS.COM ©2011 DELTA T CORP. DBA BIG ASS FAN ALL RIGHTS RESERVED