INSTALLATION GUIDE - Big Ass Fans

More documents

Recommendations

Info

PIVOT28Installing the Electronic Programming Module (EPM)If hanging multiple fans, ensure to install the exact EPM included in each fan’s packaging. EPMs are notinterchangeable!CAUTION: Install the EPM prior to applying power to the fan controller!must be installed prior toTo install the EPM, Note: The EPM can only be inserted one way. Do not force it!WARNINGDO NOT USE THISDISCONNECT TOSTART AND STOP THEFAN. PERMANENTDAMAGE WILLRESULT!SCA MEAUTOFWDREVRUNElectronicProgrammingModuleMRFSTOP1 2 5 6 25 4 1113A13B13C 14 30 16 17L1U/T1 V/T2 W/T3PEL1 L2 L2 L3L3WWW.BIGASSFANS.COM ©2011 DELTA T CORP. DBA BIG ASS FAN ALL RIGHTS RESERVED
PIVOTWiring: Early Suppression Fast Response (ESFR)WARNING: Wait three minutes after disconnecting before servicing!should perform the installation.ATTENTION: If installing the fan in the United States, the fan must be installed per the following National Fire Protection<strong>Ass</strong>ociation (NFPA) guidelines: The fan must be centered approximately between four adjacent sprinklers. Terminals 4 & 13Afor ESFR RelayAUTOFWD1 2 5 6 25 4 1113A13B13C 14 30 16 17REVRUNMRFSTOPL1U/T1 V/T2 W/T3PEL1 L2 L2 L3L3From Main FACP orNAC Box if Applicable.PAM-SDRelay Coil/Contact DetailsRelay is mounted to thebackside of the access cover.White (X2)Red (X2)(-)(+)CNCNOCoil: 20-32VDC @ 20mABlueYellowOrangeWWW.BIGASSFANS.COM ©2011 DELTA T CORP. DBA BIG ASS FAN ALL RIGHTS RESERVED
Page 2: PIVOTInstallation ChecklistDid a st
Page 7: PIVOTContentsIntroduction Safety In
Page 12 and 13: 4Parts included (cont.)PIVOTCageSec
Page 14 and 15: 6Preparing the work sitePIVOTMechan
Page 16 and 17: PIVOT8 Mounting Structure: I-BeamBi
Page 18 and 19: PIVOT10 2. Pre-drill angle ironsØ
Page 20 and 21: 12PIVOT4b. Fasten double angle iron
Page 22 and 23: PIVOT14 Hanging the Fan1. Attach ba
Page 24 and 25: 16PIVOT5. Attach pivot jointIf the
Page 26: PIVOT18 Installing Airfoils1. Attac
Page 29 and 30: PIVOTPivoting the Fan211. Adjust pi
Page 31 and 32: PIVOT234. Install remaining guy wir
Page 33 and 34: Power requirements for fan controll
Page 35: Power wiring guidelines (cont.)PIVO
Page 39 and 40: PIVOTWiring: 200-250V three-phase f
Page 41 and 42: Daisy ChainingPIVOT33WARNING: Wait
Page 43 and 44: Operating the fan controllerPIVOT35
Page 45: Annual Maintenance ChecklistFan Mod
Page 48 and 49: PIVOT40 Warranty Return Instruction
Page 51 and 52: Warranty Claim Formassfans.comName
Page 53 and 54: Check-In Procedure(for Big Ass assf
Page 55 and 56: Close-Out Procedure(for Big Ass ass
Page 60: 1001010801Rev. H2348 Innovation Dri

INSTALLATION GUIDE - Big Ass Fans

Create successful ePaper yourself

Delete template?

Save as template?