INSTALLATION GUIDE - Big Ass Fans
INSTALLATION GUIDE - Big Ass Fans
INSTALLATION GUIDE - Big Ass Fans
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PIVOTTroubleshootingWARNING: When servicing or replacement of a component in the fan requires the removal or disconnection of a safetydevice, the safety device is to be reinstalled or remounted as previously installed.power supply before servicing.WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:a) Use this fan only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.b) Before servicing or cleaning the fan, switch power off at service panel and lock the service disconnecting means toprevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securelyfasten a prominent warning device, such as a tag, to the service panel.support.SymptomThe fan is turning in the wrong direction.A popping noise is coming from the fan.Airfoil noise comes from airfoils that areThe fan will not start.The fan controller generates radiofrequency noise (RF).Fan controllers generate RF noise in manyThe motor makes noise when fan speed isincreased.be an indicator of a stall condition.Possible solution(s)button on the controller.<strong>Ass</strong> Note: Some motor, gearbox, or drive noise is to be expected and is normal.WWW.BIGASSFANS.COM ©2011 DELTA T CORP. DBA BIG ASS FAN ALL RIGHTS RESERVED