INSTALLATION GUIDE - Big Ass Fans

PIVOT22 Installing Guy WiresGuy wire installation is recommended if the fan’s extension tube is 4 ft (1.2 m) or longer, if the fan is pivoted, if the fan1. Attach eyebolt to motor frameGuy Wire Hardware:a. b. c. abbc2. Attach beam clampCAUTION: When taut, the guy wire must be clear of moving fanairfoils. Place the beam clamp accordingly.structure.Beam Clampaboutside of the beam clamp.Guy Wire Hardware:a. b. c. d. cd3. Route guy wire through Gripple ®GrippleNote: To back the guy wire out of the Gripple, insert 1/16 (1.5 mm) Allenwrench into the small hole on the Gripple.WWW.BIGASSFANS.COM ©2011 DELTA T CORP. DBA BIG ASS FAN ALL RIGHTS RESERVED