Operator's Manual

LNC-M520iCNC Operation• DGNOS Function Key Tree FigureDGNOSALARMALARMWARNHISMSGLOGHSTDisplay System Alarm (2.10.1)Display System Warning (2.10.1)Display System Version and Program Debugging Message (2.10.1)Display System Alarm/Warning Record (2.10.1)IOCSAIOCSADisplay I Bit (2.10.2)Display O Bit (2.10.2)Display C Bit (2.10.2)Display S Bit (2.10.2)Display A Bit (2.10.2)MLC2LADCNTREGDRGTMRDisplay LADDER Diagram (2.10.3)Display Counter Value (2.10.3)Display R Register (2.10.3)Display D Register (2.10.3)Display Timer Value (2.10.3)SYSTEMGBLH.DDisplay System Maintenance Variable (2.10.4)Display Hardware Diagnosis Condition (2.10.4)RSTCLR TMRCLR CNTINI CNTMAX CNTClear Running Time (2.10.5)Clear Working Part (2.10.5)Setting Start Working Part(2.10.5)Setting Target Working Part (2.10.5)PGDNSYSUPDEnter into System Upgrade Page (2.10.6)CIRCULSTARTADDADD 1ADD 10ADD 100Start Canned Cycle (2.10.7)Setting Error to +/- (2.10.7)Setting Error to +/- 1 Percent (2.10.7)Setting Error to +/- 10 Percent (2.10.7)Setting Error to +/- 100 Percent (2.10.7)22 LNC Technology Co., Ltd.