Operator's Manual

LNC-M520iCNC Operation1 st Type: Drill-Machining, There are 5 working styles, which are G73, G83, G85, G89 andTAP. 5 working methods are as following:1 2 3 4 5Figure 2.8-2 Drill-Machining1. Linear type orientation(G101),2. Circle type orientation(G102),3. Arch type orientation(G103),4. Square type orientation(G104),5. Random type orientation(G105).2 nd Type: Facing-milling, 4 working methods are as following:1 2 3 4Figure 2.8-3 Face-Milling1. X-axis two directions surface(G111),2. Y-axis two directions surface(G112),3. X-axis single direction surface(G113),4. Y-axis single direction surface(G114)70 LNC Technology Co., Ltd.