Operator's Manual

LNC-M520iCNC Operation2.10 DGNOSPressing and 6 main function screens occur, which are 【 ALARM 】 ,【SYSUPD】, 【IOCSA】, 【MLC2】, 【SYSTEM】 and 【CIRCUL】. Users are able toknow the condition of HMI signal and machine condition from the DGNOS function screenin order to do the maintenance and the system testing.2.10.1 ALARMClicking【ALARM】to enter into the 【ALARM】, 【WARN】, 【HISMSG】 and【LOGHST】. When there is any alarm message or warning message from MLC, the alarmmessage will occur on the screen. Users can use this screen to remove any irregularcondition of the controller.Figure 2.10-1ALARM Message Screen【ALARM】Alarm message will occur when there is any problem in system running. This will make thesystem stop running and also will display the alarm message on the screen. When theproblem is solved, must press in order to release the situation.82 LNC Technology Co., Ltd.