Operator's Manual

LNC-M520iCNC Operation• CUT PARThis page is mainly to define the related CAM calculation and the output parameters.For each column’s definition, please refer to the description of the related cuttingparameters. All parameter definitions must be reasonable before pressing [NC GearShifting] button in order to produce the correct path program.Figure 2.7-4 CUT PAR PageLike the above Figure, it describes that this time’s production is to cut from Z=0 toZ=-2 from the working face. Also, everytime’s cutting depth is 2mm, the tool diameteris ψ8, the cutting width is 4mm, the fine-cutting preservation width is 2mm and etc.LNC Technology Co., Ltd. 65