Menyanthes User Manual - KWR Watercycle Research Institute

More documents

Recommendations

Info

4.5 The ‘Explanatory Series’ sectionUnder the heading ‘Explanatory Series’ you find the options and functions concerning theexplanatory series. Most functionality has already been listed in section 0, except for:• A Table button to view the selected series in a table.4.6 The ‘Time Series Models’ sectionUnder the heading ‘Time Series Models’ you find the options and functions concerning thetime series models, including:• The Show residuals button, above the ‘lock time-axis’ button next to the graph, toview the residuals instead of the simulation.• A View button to open a new window with a graph of the observations, thepredictions, and optionally either the residuals or the separate contributions of alldifferent stresses.• A Statistics module with the calibration statistics of the selected model.• A Compare Models module to compare various characteristics of the selected models.• A Simulate module to simulate groundwater level series using the selected model.• A Select GWL button to select the corresponding groundwater level series in the‘Observation Wells’ section.• A Histograms button, to produce an overview of the explained variances of the modelsin the database (see section 7.4).• A Multi-plots button to plot the simulations of different models in one figure.4.7 The ‘Map with Locations’The ‘Map with Locations’ displays an outline map with the locations of the observation wells(red dots), the explanatory series (green dots) and the models (blue dots). The locations of theseries are only displayed if coordinates are available in the data set. The map has differentfunctions, depending on the selections that are made in the Toolbar or under Map. Thesefunctions are described in section 4.2.4.8 Loading and showing the digital elevation model / AHNIf you have access to the AHN, you can also use it in Menyanthes (see also Appendix A.3). Thefiles need to be split and converted. You can load and convert the AHN files via [Tools >Digital Elevation Model > Import], but we recommend requesting the already converted files atmenyanthes_support@kwrwater.nl.Menyanthes Manual© KWR - 15 -
Figure 4: Screen to view the digital elevation model of the selected areaThe elevation files are used whenever a cross section is created (at the moment only the 100meter AHN is used and only in 3D mode), and as background topography for gaining betterinsight in the situation of a certain well or area. The button opens a user interface showingthe ‘Digital Elevation Model’, and opens with the same zoom limits as the map in the mainscreen. Whether the 100 meter or the 5 meter AHN is displayed depends on how big the zoomarea is. If you are zoomed in on an area less than 12.5 by 12.5 km, the 5 meter data is shown,otherwise the 100 meter data.The ‘Digital Elevation Model’ user interface contains the following extra functions:Rotate 3D – Rotate the digital elevation model in three dimensions.Codes on/off – Select whether the codes of the wells or shown or not.Menyanthes Manual© KWR - 16 -
Page 2 and 3: Menyanthes User ManualVersion 2.x.b
Page 4 and 5: ContentsContents 11 Introduction 41
Page 6 and 7: 10 List of references 47I Appendix
Page 8 and 9: - Improved output at different scre
Page 10 and 11: 2 Technical specifications andrequi
Page 12 and 13: 3 The installation procedure3.1 Ins
Page 14 and 15: Since then, Menyanthes also require
Page 16 and 17: New - open a new databaseOpen - fin
Page 20 and 21: 5 Database and graphic functionalit
Page 22 and 23: pumping well or other explanatory s
Page 24 and 25: Figure 8 Module for editing the tec
Page 26 and 27: 6 Groundwater statistics6.1 The sta
Page 28 and 29: • Simulated series are affected b
Page 30 and 31: 7.1.1 Options in the Groundwater Le
Page 32 and 33: 2) Values of the explanatory series
Page 34 and 35: plotted, together with the estimate
Page 36 and 37: 8 Simulating groundwater level seri
Page 39 and 40: Figure 22 the two tabs of the Spati
Page 41 and 42: 1. Enter the barametric datalogger
Page 43 and 44: The three section of the Diver Data
Page 45 and 46: Figure 25 Screen to get a detailed
Page 47 and 48: Figure 26 The edit screen for datal
Page 49 and 50: Figure 27 Screen to edit technical
Page 51 and 52: I Appendix A: Description of import
Page 53 and 54: length of the sediment sump of the
Page 55 and 56: 2. Go the menu and to Tools > Digit
Page 57 and 58: M0 PRECSDEVEVAP FWELL NAMEM0 WELL-
Page 59 and 60: IV Appendix D: Data structure in MA
Page 61 and 62: V Appendix E : AcknowledgementsFina
Page 63: Postbus 1072 3430 BB Nieuwegein The

Menyanthes User Manual - KWR Watercycle Research Institute

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?