KEMA - Weidmüller Interface GmbH & Co. KG
KEMA - Weidmüller Interface GmbH & Co. KG
KEMA - Weidmüller Interface GmbH & Co. KG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Appendix No. 6<br />
to Certificate of <strong>Co</strong>nformity:<br />
Terminal coolent of enclosure type:<br />
Enclosure dimension in mrn:<br />
<strong>KEMA</strong> 99ATEX7540 X<br />
<strong>KEMA</strong>~<br />
~310.ll8I2AR Am"""<br />
PostbUs 9035. NL -6800 Ef Amhem<br />
NexT 503520<br />
H= 500 W= 350 D= 205<br />
The table shows the maximum number of conductors depending on the cable size and permitted<br />
current for the above mentioned enclosure.<br />
"<strong>Co</strong>nductor" means every conductor entering the enc10sure and every internal connecting<br />
conductor. Any cross connections or earth terminals are not counted.<br />
Current 1.5 2.5 10 16<br />
(Amps)<br />
8 237<br />
1 115<br />
1 39 76 298<br />
2 16 45 86<br />
25 21 49 94<br />
35 14 37 91<br />
5 5 30 76<br />
63 10 35<br />
8 13<br />
1<br />
125<br />
1<br />
2<br />
225 The terminal conten! in this<br />
25 area requires apower<br />
315 dissipation test reporl from<br />
40 the manufacturer<br />
50<br />
70 95 120 150 185 240<br />
In /his area yau can add as many<br />
terminals as physically possible.<br />
125<br />
39 140<br />
16 37<br />
15 37<br />
13 33<br />
12 28<br />
4 16<br />
8<br />
Maximum physical terminal coolent depends on the terminal dimension and<br />
the maximum permissibte cable size used.<br />
88<br />
34<br />
21 44<br />
4 12 26<br />
5 18<br />
2<br />
Note:<br />
Maximum permissible rated current of the applied terminals and cables must be taken<br />
into account. Cables used intemally must be suitable for a temperature between 70° and 80°C.<br />
For 1arger cables, the number of conductors must be advised by the manufacturer ( with Power<br />
Dissipation Test Report ).<br />
When using the table above, de-rating factors or nominal rated currents in accordance with<br />
IEC 439 shou1d be used.<br />
Different types of terminals can be used together by utilising the tabular values proportionally.<br />
Example: <strong>Co</strong>nductor Size Current Number Load