KEMA - Weidmüller Interface GmbH & Co. KG
KEMA - Weidmüller Interface GmbH & Co. KG
KEMA - Weidmüller Interface GmbH & Co. KG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Appendix No. 10<br />
to Certificate of <strong>Co</strong>nformity:<br />
Terminal content of enclosure type:<br />
Enclosure dimension in mm:<br />
<strong>KEMA</strong> 99A TEX7540 X<br />
NexT 745520<br />
H- 740 W= 550 D= 205<br />
KfMA :b<br />
•••• <strong>KEMA</strong> ,<br />
lItrechlsoweg310.6812AR_<br />
_9035.Hl.-ET Am"""<br />
The table shows the maximum number of eonductors depending on the cable size and permitted<br />
current for the above mentioned enclosure.<br />
"<strong>Co</strong>nductor" means every eondnctor entering the enclosure and every internal connecting<br />
eonductor. Any cross connections or earth terminals are not counted.<br />
1.5 2.5<br />
302<br />
147<br />
50<br />
21<br />
97 379<br />
57 110<br />
27 62<br />
18<br />
120<br />
47 116<br />
7 38<br />
13<br />
The terminal content in this<br />
area requires apower<br />
dissipation test report from<br />
the manufacturer<br />
on uetor lze mm<br />
10 16 25 35 50 70 95 120 150 185 240<br />
96<br />
45<br />
17<br />
159<br />
50<br />
21<br />
2<br />
178<br />
47<br />
19<br />
In this area you can add as many<br />
termifUJls os physically possible.<br />
47<br />
16 42<br />
15 36 112<br />
5 21 44<br />
11 27 56<br />
5 16 33<br />
7<br />
Maximum physical terminal content depends on the terminal dimension and<br />
the maximum permissible coole size used.<br />
Note:<br />
Maximum pennissible rated current of the applied terminals and cables must be laken<br />
into account. Cables used internally must be suitable for a temperature between 70 0 and sODe.<br />
For larger cables, the number of conductors mnst be advised by the manufacturer ( with Power<br />
Dissipation Test Report ).<br />
When using the table above, de-rating factors Of nominal rated currents in accordance with<br />
IEC 439 should be used.<br />
Different types of terminals can be used tagether by utilising the tabular values proportionally.<br />
Example: <strong>Co</strong>nductor Size Currenl Number Load