KEMA - Weidmüller Interface GmbH & Co. KG
KEMA - Weidmüller Interface GmbH & Co. KG
KEMA - Weidmüller Interface GmbH & Co. KG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Appendix No. 34<br />
to Certificate of <strong>Co</strong>nformity:<br />
Terminal content of enclosure type:<br />
Enclosure dimension in mm:<br />
<strong>KEMA</strong> 99ATEX7540 X<br />
NexT 916128<br />
H= 914 W= 610<br />
D= 280<br />
<strong>KEMA</strong> :b<br />
u.••••.• ,<br />
Utrachtseweg 310, 6812 AR AmPIenI<br />
Postbus9Q35, Nl-6800ET Arn1\enI<br />
The table shows the maximum number of conducters depending on the cable size and pennitted<br />
current for the above mentioned enclosure.<br />
"<strong>Co</strong>nductor" means every conductor entering the enclosure and every internal connecting<br />
conductor. Any cross connections or earth terminals are not counted.<br />
Note:<br />
1.5 2.5<br />
120 466<br />
70 135<br />
33 77 147<br />
22 58<br />
8<br />
The terminal content in this<br />
area requires apower<br />
dissipation test report from<br />
the manufacturer<br />
on ucter lze mm<br />
10 16 25 35 50 70 95 120 150 185 240<br />
143<br />
47 119<br />
16 55<br />
21<br />
196<br />
61 219<br />
26 58<br />
2 23<br />
In this area you can add as many<br />
terminals as physica/ly possible.<br />
58<br />
20 51<br />
18 45 138<br />
7 26 54<br />
13 33 68<br />
7 20 41<br />
9 28<br />
4<br />
Maximum physical terminal content depends on the terminal dimension and<br />
the maximum permissible cable size used.<br />
Maximum permissib1e rated current of the applied terminals and cabJes must be laken<br />
into account. Cables used intemaUy must be suitable for a temperature between 70° and 80°C.<br />
For larger cables, the number of conductors must be advised by the manufacturer ( with Power<br />
Dissipation Test Report ).<br />
When using the table above, de-rating factors er nominal rated currents in accordance with<br />
IEC 439 should be used.<br />
Different types of terminals can be used together by utilising the tabular values proportionaUy.<br />
Example: <strong>Co</strong>nductor Size Current Number Load