KEMA - Weidmüller Interface GmbH & Co. KG
KEMA - Weidmüller Interface GmbH & Co. KG
KEMA - Weidmüller Interface GmbH & Co. KG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Appendix No. 20<br />
to Certificate of <strong>Co</strong>nfonnity:<br />
Terminal conten! cf enclosure type:<br />
Enclosure dimension in mrn:<br />
<strong>KEMA</strong> 99ATEX7S40 X<br />
NexT 303016<br />
H= 306 W= 306 D= 160<br />
The table shows the maximum number of conductors depending on the cable size and pennitted<br />
current for the above mentioned enclosure.<br />
"<strong>Co</strong>nductor" means every conductor entering the enclosure and every internal connecting<br />
conductor. Any cross connections or earth terminals are not counted.<br />
1.5 2.5<br />
184<br />
89<br />
30 59 230<br />
12 34 67<br />
16 38 73<br />
11 28 71<br />
4 23 58<br />
7 27<br />
10<br />
The terminal content in this<br />
area requires apower<br />
dissipation test report from<br />
the manufacturer<br />
on ucter tze mrn<br />
10 16 25 35 50 70 95 120 150 185 240<br />
96<br />
30 108<br />
13 28<br />
11 29<br />
10<br />
In this area you can add as many<br />
terminals as physically possible.<br />
Maximum physical terminal conten! depends on the terminal dimension and<br />
the maximum pennissible coole size used.<br />
Note:<br />
Maximum pennissible rated current of the applied terminals and cables must be taken<br />
into account. Cables used intemally must be suitable for a temperature between 70° and 80°C.<br />
For larger cables, the number of conductors must be advised by the manufacturer ( with Power<br />
Dissipation Test Report ).<br />
When using the table above, de-rating factors or nominal rated currents in accordance with<br />
IEC 439 should be used.<br />
Different types of tenninals can be used together by utilising the tabular values proportionaJly.<br />
Example: <strong>Co</strong>nductor Size Current Number Load