1 Display the screen. - Utax

Setup, Registration, and User Management > System MenuCopyConfigures settings for copying functions.ItemAuto Paper SelectionAuto % PriorityCopy - DP Read ActionDescriptionIf [Auto] is selected for Paper Selection, set the paper size selection method when the zoomchanges.*ValueMost Suitable Size: Select paper based on the current zoom and the size of the original.Same as Original Size: Select paper that matches the size of the original, regardless the zoom.When a paper source of different size from the original is selected, select whether automaticzoom (reduce/zoom) is performed.*Value: Off, OnYou can set whether priority is given to speed or image quality when scanning an original onthe document processor.Value: Speed Priority, Quality Priority* If you want to enable the changed defaults immediately, move to the function screen and press the Reset key.SendConfigures settings for sending functions.ItemDest. Check before SendEntry Check for New Dest.Send and ForwardForwardDestinationColor TIFF CompressionDefault ScreenDescriptionWhen performing sending jobs, display the confirmation screen of destinations after pressingthe Start key.Value: Off, OnWhen adding new destination, display the entry check screen to check the entered destination.Value: Off, OnSet whether to send the original to another destination and store it when sending images.Set the rule to send the original. Multiple rules can be selected.ValueForward: Off, OnRule: FAX, E-mail, Folder (SMB), Folder (FTP)Set the destination to use when storing originals.Select the destination using either of the following methods:• Address Book• Ext. Address Book• Address Entry (E-mail)• Address Entry (Folder)Select the compression method for TIFF images handled on this machine.Value: TIFF V6, TTN2Use this procedure to set the default screen displayed when you press the Send key.Value: Destination, Address Book, Ext Address Book, One Touch9-14