1 Display the screen. - Utax

Preparation before Use > Embedded Web Server (Settings for E-mail)Login PasswordSMTP SecurityPOP before SMTPTimeoutTestE-mail Size LimitSender AddressSignatureItemDomain RestrictionDescriptionWhen Other is selected for Authenticate, the password set here will beused for authentication. The maximum length of the login password is 64characters.Enables or disables the SMTP Security. When this protocol is enabled,either SSL/TLS or STARTTLS must be selected. To enable SMTPsecurity, the SMTP port may have to be changed according to the serversettings. Typically, 465 for SSL/TLS and 25 or 587 for STARTTLS arewell-known SMTP ports.Set the amount of time to wait before time-out in seconds when you haveselected POP before SMTP as the Authentication Protocol.This will test if the SMTP connection can be successfully established.Enter the maximum size of E-mail that can be sent in kilobytes. When thevalue is 0, no maximum size is set.Enter the E-mail address of the person responsible for the machine, suchas the machine administrator, so that a reply or non-delivery report will goto a person rather than to the machine. The sender address must beentered correctly for SMTP authentication. The maximum length of thesender address is 128 characters.Enter the signature. The signature is free form text that will appear at theend of the E-mail body. It is often used for further identification of themachine. The maximum length of the signature is 512 characters.Enter the domain names that can be permitted or rejected. The maximumlength of the domain name is 32 characters. You can also specify E-mailaddresses.3Click [Submit].2-25