1 Display the screen. - Utax

Setup, Registration, and User Management > System MenuNetWareItemDescriptionNetWareSelect the NetWare network connection. After that, select frame types for NetWare networkfrom Auto, Ethernet-II, 802.3, 802.2, or SNAP.*ValueNetWare: Off, OnFrame Type: Auto, 802.3, Ether-II, 802.2, SNAP* After changing the setting, restart the system or turn the machine OFF and then ON.AppleTalkItemDescriptionAppleTalkSelect the Apple Talk network connection.*Value: Off, On* After changing the setting, restart the system or turn the machine OFF and then ON.WSD ScanItemDescriptionWSD ScanSelect whether or not to use WSD Scan.*Value: Off, On* After changing the setting, restart the system or turn the machine OFF and then ON.WSD PrintItemDescriptionWSD PrintSelect whether or not to use WSD Print.*Value: Off, On* After changing the setting, restart the system or turn the machine OFF and then ON.Enhanced WSDItemEnhanced WSDDescriptionSet whether to use our proprietary web services.*Selecting [Off] will disable the functionality of WIA and TWAIN drivers. If you want to disableNetwork Print Monitor functionality, Enhanced WSD, Enhanced WSD (SSL), SNMP andSNMPv3 (refer to Protocol Detail on page 9-20) must be set to [Off].Value: Off, On* After changing the setting, restart the system or turn the machine OFF and then ON.Enhanced WSD (SSL)ItemEnhanced WSD (SSL)DescriptionSet whether to use our proprietary web services over SSL.*Value: Off, On* After changing the setting, restart the system or turn the machine OFF and then ON.9-21