1 Display the screen. - Utax

More documents

Recommendations

Info

Appendix > Optional Equipment2 With the memory connection terminal pointing toward the socket, align the cut-out part withthe socket terminal and insert directly in at an angle.3 Carefully press the inserted memory down and into the machine.4 Reinstall the covers.Removing the Memory ModuleTo remove a memory module, remove the right cover and the memory slot cover from the machine. Then, carefully pushout the two socket clamps. Ease the memory module out of the socket to remove.Verifying the Expanded MemoryTo verify that the memory module is working properly, test it by printing a status page.Refer to Report on page 9-5.IMPORTANTBefore inserting a memory module in the machine, make sure that the machine isswitched off.Card Authentication KitUser authentication can be performed using IC cards. To do so, it is necessary to register IC card information on thepreviously registered local user list. For more information about how to register this information, refer to the IC CardAuthentication Kit Operation Guide.Gigabit Ethernet BoardThe Gigabit Ethernet Board provides a high-speed connection for the Gigabit-per-second interface. Since the kit wasdesigned to work with TCP/IP, NetWare, NetBEUI, and AppleTalk protocols, in the same way as the main unit, it fulfillsthe network printing demands on Windows, Macintosh, and UNIX environments. This expansion kit is also compatiblewith ThinPrint.USB KeyboardA USB keyboard can be used to enter information into the text fields on the operation panel. Please contact your dealeror service representative for information on keyboards that are compatible with your MFP before you purchase one.11-4
Appendix > Optional EquipmentOptional FunctionYou can use the optional applications installed on this machine.Overview of the ApplicationsThe applications listed below are installed on this machine. You can use these applications for a limited period on a trialbasis.UG-33 (ThinPrint) (This application can only be activated in Europe.)This application allows print data to be printed directly without a print driver.NOTERestrictions such as the number of times the application can be used during the trial period differ depending on theapplication.Starting Application UseUse the procedure below to start using an application.NOTEIf user login administration is disabled, the user authentication screen appears. Enter your login user name andpassword and then press [Login]. For this, you need to login with administrator privileges. Refer to Adding a User onpage 9-36 for the default login user name and password.1Display the screen.Use [ ] or [ ] to scroll up and down.System Menu/Counter.System Menu10:10System1Date/Timer2Adjustment/Maintenance System Menu/Counter.System5/510:10Optional FunctionGB0054_0432/2GB0511_01< Back2Start using an application.1 Select the desired application and press [Activate].System Menu/Counter.System - Optional FunctionCARD AUTHENTICA...10:1011/1ActivateEndGB0557_002Displays details for individual applications.11-5
Page 1 and 2:
USER MANUALDIGITALMULTIFUNCTIONAL C
Page 4 and 5:
Favorites .........................
Page 6 and 7:
Internet ..........................
Page 9 and 10:
Quick GuideTo make copiesBe sure to
Page 11 and 12:
To send a FAXIt faxes.As well as se
Page 13 and 14:
One Touch Key (page 6-16)Address Bo
Page 15 and 16:
Print Job Status (page 8-3)Send Job
Page 17 and 18:
Cassette/MP TraySettings (page 9-7)
Page 19 and 20:
Document BoxSub Address Box (refer
Page 21 and 22:
System (page 9-18) Network (page 9-
Page 23 and 24:
1 PrefaceThis chapter explains the
Page 25 and 26:
Preface > NoticeEnvironmentThe serv
Page 27 and 28:
Preface > NoticeSafety Instructions
Page 29 and 30:
Preface > Legal and Safety Informat
Page 31 and 32:
Preface > Legal and Safety Informat
Page 33 and 34:
Preface > About this Operation Guid
Page 35 and 36:
Preface > About this Operation Guid
Page 37 and 38:
2 Preparation beforeUseThis chapter
Page 39 and 40:
Preparation before Use > Part Names
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Preparation before Use > Determinin
Page 47 and 48:
Preparation before Use > Connecting
Page 49 and 50:
Preparation before Use > Power On/O
Page 51 and 52:
Preparation before Use > Installing
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Preparation before Use > Energy Sav
Page 59 and 60:
Preparation before Use > Embedded W
Page 61 and 62:
Preparation before Use > Embedded W
Page 63 and 64:
3 Common OperationsThis chapter exp
Page 65 and 66:
Common Operations > Loading PaperLo
Page 67 and 68:
Common Operations > Loading Paper2T
Page 69 and 70:
Common Operations > Loading Paper?2
Page 71 and 72:
Common Operations > Loading PaperIM
Page 73 and 74:
Common Operations > Loading Origina
Page 75 and 76:
Common Operations > Checking the Eq
Page 77 and 78:
Common Operations > Login/LogoutLog
Page 79 and 80:
Common Operations > FavoritesFavori
Page 81 and 82:
Common Operations > Favorites5Check
Page 83 and 84:
Common Operations > FavoritesEditin
Page 85 and 86:
Common Operations > FavoritesUsing
Page 87 and 88:
Common Operations > ShortcutsShortc
Page 89 and 90:
Common Operations > ShortcutsEditin
Page 91 and 92:
Common Operations > Quick Setup Wiz
Page 93 and 94:
Common Operations > Help ScreenHelp
Page 95 and 96:
Common Operations > Using Various F
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
4 CopyingThis chapter explains the
Page 121 and 122:
Copying > Basic Operation5 Entering
Page 123 and 124:
Copying > Copying FunctionsZoomAdju
Page 125 and 126:
Copying > Copying FunctionsDuplexCo
Page 127 and 128:
Copying > Copying Functions4 Select
Page 129 and 130:
Copying > Copying Functions1Display
Page 131 and 132:
Copying > Copying FunctionsEcoPrint
Page 133 and 134:
Copying > Copying FunctionsColor Ba
Page 135:
5 PrintingThis chapter explains the
Page 138 and 139:
Printing > Printing from Applicatio
Page 140 and 141:
Printing > Printing Data Saved on t
Page 142 and 143:
Page 144:
Page 147 and 148:
6 SendingThis chapter explains the
Page 149 and 150:
Sending > Basic Operation1 Press th
Page 151 and 152:
Sending > Preparation for Sending a
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Sending > Specifying DestinationDes
Page 163 and 164:
Sending > Specifying DestinationEnt
Page 165 and 166:
Sending > Specifying DestinationFor
Page 167 and 168:
Sending > Specifying DestinationChe
Page 169 and 170:
Sending > Registering Destinations
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Sending > Adding a Destination on O
Page 181 and 182:
Sending > Sending FunctionsSending
Page 183 and 184:
Sending > Sending Functions[Metric]
Page 185 and 186:
Sending > Sending FunctionsE-mail S
Page 187 and 188:
Sending > WSD ScanWSD ScanWSD Scan
Page 189 and 190:
Sending > WSD ScanProcedure from Yo
Page 191 and 192:
Sending > Scanning using TWAINItemD
Page 193 and 194:
7 Document BoxThis chapter explains
Page 195 and 196:
Document Box > Printing Documents S
Page 197 and 198:
Document Box > Saving Documents to
Page 199 and 200:
Document Box > Removing USB MemoryR
Page 201 and 202:
Document Box > Functions for Docume
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
8 Status / Job CancelThis chapter e
Page 209 and 210:
Status / Job Cancel > Checking Job
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Status / Job Cancel > Sending the L
Page 217 and 218:
Status / Job Cancel > Sending the L
Page 219 and 220:
Status / Job Cancel > Check of Devi
Page 221 and 222:
9 Setup, Registration,and User Mana
Page 223 and 224:
Setup, Registration, and User Manag
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272: Setup, Registration, and User Manag
Page 293 and 294: 10 TroubleshootingThis chapter expl
Page 295 and 296: Troubleshooting > Toner Container R
Page 297 and 298: Troubleshooting > Waste Toner Box R
Page 299 and 300: Troubleshooting > Cleaning2Wipe the
Page 301 and 302: Troubleshooting > Solving Malfuncti
Page 303 and 304: Troubleshooting > Solving Malfuncti
Page 305 and 306: Troubleshooting > Responding to Err
Page 315 and 316: Troubleshooting > Clearing Paper Ja
Page 317 and 318: Troubleshooting > Clearing Paper Ja
Page 319 and 320: 11 AppendixThis chapter explains th
Page 321: Appendix > Optional EquipmentExpans
Page 325 and 326: Appendix > Character Entry MethodCh
Page 327 and 328: Appendix > Character Entry MethodEn
Page 329 and 330: Appendix > PaperBasic Paper Specifi
Page 331 and 332: Appendix > PaperPaper moisture cont
Page 333 and 334: Appendix > PaperLabelBe sure to fee
Page 335 and 336: Appendix > PaperRecycled PaperRecyc
Page 337 and 338: Appendix > SpecificationsItemDescri
Page 339 and 340: Appendix > SpecificationsEnvironmen
Page 341 and 342: Appendix > Glossarynetwork. DHCP (I
Page 343 and 344: Appendix > GlossarySMTP (Simple Mai
Page 345 and 346: IndexAAddress BookAdding a Contact
Page 347 and 348: LLabel 11-15Language 9-5LAN Interfa
Page 349 and 350: Toner Container 2-3Checking the Rem
Page 352: TA Triumph-Adler GmbH, Ohechaussee
show all

1 Display the screen. - Utax

Create successful ePaper yourself

Delete template?

Save as template?