1 Display the screen. - Utax

Preparation before Use > Embedded Web Server (Settings for E-mail)Sending E-mailSpecifying the SMTP settings allows you to send images loaded onto this machine as E-mail attachments.To use this function, this machine must be connected to a mail server using the SMTP protocol.Before sending images loaded onto this machine as E-mail attachments, check the following:• The network environment used to connect this machine to the mail server: A full-time connection via a LAN isrecommended.• SMTP Settings: Use Embedded Web Server to register the IP address or host name of the SMTP server.• If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.1Display the screen.12 32Configure the function.Enter the correct settings in each field.ItemSMTP ProtocolDescriptionEnables or disables SMTP protocol. To use E-mail, this protocol must beenabled.SMTP Port Number Set the SMTP Port Number or use the SMTP default port 25.SMTP Server NameSMTP Server TimeoutAuthentication ProtocolAuthenticate asLogin User NameEnter the SMTP server IP address or its name. The maximum length ofthe SMTP server name and IP address is 64 characters. If entering thename, a DNS server address must also be configured. The DNS serveraddress may be entered on the TCP/IP General tab.Set the amount of time to wait before time-out in seconds.Enables or disables the SMTP authentication protocol or sets POP beforeSMTP as the protocol. The SMTP authentication supports MicrosoftExchange 2000.Authentication can be set from three POP3 accounts or you can choose adifferent account.When Other is selected for Authenticate, the login user name set here willbe used for SMTP authentication. The maximum length of the login username is 64 characters.2-24