Owner's Manual - Polaris

MAINTENANCEThrottle Cable Freeplay4. Place the transmission in PARK. Lock the parking brake.5. Start the engine and allow the idle to stabilize. If necessary, tap thethrottle lever to ensure the idle speed settles.6. If idle speed remains above or below the recommended setting (seespecification pages), verify the correct gap. If gap is correct and idlespeed is still not satisfactory, please see your POLARIS dealer forservice.7. With the engine running, turn the handlebars fully to the left andright. Tap the throttle lever at each turn, verifying that idle RPMreturns to the recommended setting. If idle speed increases, it maybe necessary to increase the gap between the stop pin and throttlearm, but do not exceed the recommended 2-3 mm gap.8. When adjustments are complete, tighten the locknut.9. Squeeze the end of the rubber boot and slide it over the cableadjuster to its original position.10. Ensure the control cover seal is in place, then reinstall the cover andscrews.111