Owner's Manual - Polaris

2x4FEATURES AND CONTROLSSwitchesHeadlightSwitchMode/ReverseOverrideButtonEngineStop SwitchMain KeySwitch4X4 SwitchMode/Reverse Override SwitchThis vehicle is equipped with a reverse speed limiter system. To gainadditional wheel speed while backing, release the throttle and depressthe override button.WARNING! Pressing the override button while the throttle is open can causeloss of control, which may result in serious injury or death. Always release thethrottle before pressing the override button.The reverse override button also acts as a MODE button when helddown for approximately one half second. See the instrument clusterinformation beginning on page 34. The transmission cannot be inreverse when using the override button as a MODE button.4X4 SwitchUse the 4X4 switch to engage ADC 4X4, 4X4 or 2X4. See page 33. Thevehicle automatically engages 4X4 when operating in reverse if theswitch is set to either 4X4 position.Headlight SwitchUse the headlight switch to turn the lights on and off and to change thelights from high beam to low beam. The key must be in the ON positionand the engine stop switch must be in the RUN position to operate theheadlights.24