Owner's Manual - Polaris

FEATURES AND CONTROLSInstrument ClusterMulti-Function Display (MFD) Gauge (EPS Models)Display Units (Standard/Metric)The display can be viewed in either standard or metric units of measurement.To change units:1. Press and hold the MODE button until vehicle speed is displayed.2. Toggle through the information area using the SELECT button untilthe odometer is displayed.3. Press and hold the MODE button until the displayed units change.Release the button.4. New settings remain until changed using the same procedure.12-Hour/24-Hour Clock Display1. Press and hold the MODE button until RPM is displayed.2. Toggle through the information area using the SELECT button untilthe odometer is displayed.3. Press and hold the MODE button until the clock displays the newclock format (either 24-hour or 12-hour). Release the button.4. New settings remain until changed using the same procedure.Odometer ModeThe odometer records and displays the distance traveled by the ATV.Trip Meter ModeThe trip meters record the distance traveled by the ATV on each trip ifreset before each trip. To reset a trip meter, select the trip meter 1 or tripmeter 2 mode. Press and hold the MODE button on the instrument clusteruntil the total changes to 0. In the Rider Information Center, the tripmeter display contains a decimal point, but the odometer displays withouta decimal point.Hour Meter ModeThis mode logs the total hours the engine has been in operation.45