Owner's Manual - Polaris

MAINTENANCEToe AlignmentUse the following procedure to check the toe alignment of the vehicle.The recommended toe alignment is 0" to 1/8" (0-3 mm) toe out.WARNING! Severe injury or death can result from improper toe alignment andadjustment. Do not attempt to adjust tie rod alignment. All tie rod adjustmentsshould be performed by an authorized POLARIS dealer.1. Position the vehicle on alevel surface.2. Place the handlebars in astraight-ahead position.Stand3. Tie a length of stringbetween two stands asshown in the illustration.Position the stands sothat the string is flushwith the side of the reartire. If available, youmay use a long straightedgeinstead of string.String24. Measure the distancefrom the string to therim at the front (1) andrear (2) of the front rim.The rear measurement1should be 1.5 mm more than the front measurement on each side ofthe vehicle to obtain the recommended 0" to 1/8" (0-3 mm) toe outalignment.5. Repeat the measurement procedure on the other side of the vehicle.6. If you discover improper alignment, see your POLARIS dealer forservice.Steering AssemblyThe steering assembly of the ATV should be checked periodically forloose nuts and bolts. If loose nuts and bolts are found, see yourPOLARIS dealer for service before operating the vehicle.90