Owner's Manual - Polaris

FEATURES AND CONTROLSInstrument ClusterDigital/Analog GaugeRider Information CenterClock ModeTip: The clock must be reset any time the battery has been disconnected or discharged.1. Turn the key to the ON position. Use the MODE button to toggle tothe odometer display.2. Press and hold the MODE button until the hour segment flashes.Release the button.3. With the segment flashing, tap the MODE button to advance to thedesired setting.4. Press and hold the MODE button until the next segment flashes.Release the button.5. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments.After completing the 1-minute segment, step 4 will save the newsettings and exit the clock mode.6. Turn the key to the OFF position.Odometer ModeThe odometer records and displays the distance traveled by the ATV.Trip Meter ModeThe trip meter records the distance traveled by the ATV if reset beforeeach trip. To reset, select the trip meter mode. Press and hold the MODEbutton until the meter resets to zero. In the Rider Information Center, thetrip meter display contains a decimal point, but the odometer displayswithout a decimal point.Hour Meter ModeThis mode logs the total hours the engine has been in operation.39