Owner's Manual - Polaris

MAINTENANCEBatteryBattery InstallationUsing a new battery that has not been fully charged can damage the batteryand result in a shorter life. It can also hinder vehicle performance.Follow the battery charging instructions on page 114 before installingthe battery.1. Ensure that the battery is fully charged.2. Place the battery in the battery holder.3. Coat the terminals with dielectric grease or petroleum jelly.4. Secure the battery hold-down strap.5. Connect and tighten the red (positive) cable first.6. Connect and tighten the black (negative) cable last.7. Verify that cables are properly routed. Cables should be safelytucked away at the front and rear of the battery.8. Install the front rack.Battery StorageWhenever the vehicle is not used for a period of three months or more,remove the battery from the vehicle, ensure that it's fully charged, andstore it out of the sun in a cool, dry place. Check battery voltage eachmonth during storage and recharge as needed to maintain a full charge.POLARIS recommends maintaining battery charge by using aPOLARIS Battery Tender charger or by charging about once a month tomake up for normal self-discharge. Battery Tender can be left connectedduring the storage period, and will automatically charge the battery ifthe voltage drops below a pre-determined point. See page 125 for thepart numbers of POLARIS products.113