Owner's Manual - Polaris

MAINTENANCECleaning and StorageStorage TipsFog the Engine1. After stabilizing the fuel, remove the spark plugs and add 2-3 tablespoonsof engine oil. To access the plug holes, use a section of clear1/4" hose and a small plastic squeeze bottle filled with the pre-measuredamount of oil.2. Reinstall the spark plugs. Torque to specification.3. Apply dielectric grease to the inside of each spark plug cap and reinstallthe caps onto the plugs.4. Turn the engine over several times using electric start. Oil will beforced in and around the piston rings and ring lands, coating the cylinderwith a protective film of fresh oil.5. If POLARIS fuel system additive is not used, the fuel tank, fuellines, and injectors should be completely drained of gasoline.Air Filter / Air Box1. Inspect and clean (or replace) the pre-cleaner and air filter. See page95.2. Clean the air box.Inspect and LubricateInspect all cables and lubricate all areas of the vehicle as recommendedin the Periodic Maintenance Chart beginning on page 73.Battery MaintenanceRemove the battery and recharge it as outlined on page 114. Store thebattery in a cool, dry place.Storage Area/CoversSet the tire pressure and safely support the ATV with the tires slightlyoff the ground. Be sure the storage area is well ventilated. Cover thevehicle with a genuine POLARIS cover. Do not use plastic or coatedmaterials. They do not allow enough ventilation to prevent condensation,and may promote corrosion and oxidation.119