Owner's Manual - Polaris

Driving Through WaterYour ATV can operate throughwater with a maximum recommendeddepth equal to the bottomof the footrests. Followthese precautions when operatingthrough water:1. Determine water depths andcurrent before enteringwater.2. Choose a crossing whereboth banks have gradualinclines.3. Avoid operating throughdeep or fast-flowing water.OPERATIONMaximumDepthNOTICE: Major engine damage can result if the vehicle is not thoroughlyinspected after operation in water. Perform the services outlined inthe maintenance chart. See page 73. The following areas needspecial attention: engine oil, transmission oil, demand drive fluid, reargearcase oil, ADC fluid and all grease fittings.If the vehicle tips or overturns in water, or if the engine stops during orafter operating in water, restarting can result in serious enginedamage. Transport the vehicle to your dealer for service beforerestarting the engine. If this is not possible, follow the vehicleimmersion inspection and drying procedures outlined on page 104,then see your dealer for service at the first opportunity.4. After leaving water, test the brakes. Apply them lightly severaltimes while driving slowly. The friction will help dry out the pads.If it’s unavoidable to enter water deeper than the footrest level:• Proceed slowly. Avoid rocks and obstacles.• Balance your weight carefully. Avoid sudden movements.• Maintain a steady rate of speed. Do not make sudden turns or stops.Do not make sudden throttle changes.65