Owner's Manual - Polaris

FEATURES AND CONTROLSInstrument ClusterMulti-Function Display (MFD) Gauge (EPS Models)The rider information center is located in theinstrument cluster. All segments will light upfor one second at start-up. If the instrumentcluster fails to illuminate, a battery over-voltagemay have occurred and the cluster mayhave shut down to protect the electronic speedometer.If this occurs, take the ATV to yourPolaris dealer for proper diagnosis.The information center is set to display standard units of measurementand a 12-hour clock at the factory. To change to metric and/or a 24-hourclock, see page 45.1. Gear Display -This area displays 1 2 3 4gear shifter position.H = High GearL = Low GearN = Neutral5R = Reverse GearP = Park13-- = Gear Signal6Error (or shifter 12between gears)72. Information11Display - This area6 5 810 9displays odometer,tripmeters, enginehour meter and programmable service hour interval.3. Speed Display - This area displays vehicle ground speed or enginespeed. See page 44.42