Owner's Manual - Polaris

FEATURES AND CONTROLSInstrument ClusterDigital/Analog GaugeRider Information CenterEngine Error CodesThe error screen displaysonly when the CHECKENGINE light is on or whenit goes on and off during oneignition cycle. Error codesare not stored in the gaugewhen the key is turned off.The code and message islost, but will reappear if thefault reoccurs after restartingthe engine.If the CHECK ENGINElight illuminates, retrievethe error codes from the display.Please see your Polarisdealer for all major repairs.Error CodeNumber (0-9)Suspect ParameterNumber (SPN)Failure Mode Indicator (FMI)1. If the error codes are not displayed, use the MODE button to toggleuntil “Ck ENG” displays on the main line of the display.2. Press and hold the MODE button to enter the diagnostics codemenu.3. Record the numbers displayed in the gear position (if any), clockand odometer displays.4. Press the MODE button to advance to the next error code.5. Press and hold the MODE button to exit the diagnostics code menu.6. See pages 48-51 for code definitions and failure descriptions. Pleasesee your Polaris dealer for all major repairs.41