Owner's Manual - Polaris

Engine OilOil and Filter Change9. Place shop towels beneath the oilfilter. Using an oil filter wrench(available from your POLARISdealer), turn the filter counterclockwiseto remove it.10. Using a clean dry cloth, clean thefilter sealing surface on thecrankcase.11. Lubricate the o-ring on the newfilter with a film of fresh engineoil. Check to make sure the o-ringis in good condition.12. Install the new filter and rotate itclockwise by hand until the filtergasket contacts the sealing surface,then turn it an additional 1/2turn.MAINTENANCE550 850Oil Filter13. Remove the dipstick. Add the proper amount of the recommendedoil. Do not overfill.14. Reinstall the dipstick.15. Place the transmission in PARK.16. Lock the parking brake.17. Start the engine. Allow it to idle for one to two minutes.18. Stop the engine.19. Check for leaks.20. Check the oil level. Add oil as needed to bring the level to the uppermark on the dipstick.21. Dispose of used filter and oil properly.79