ICPAGING Application User Manual - Barix

2.5.1 BASIC SETTINGSThe BASIC SETTINGS page is accessible clicking the CONFIGURATION button in the top menu, itshows the most important options to be set up for a quick configuration.Illustration 3: ICMASTER basic settings page• BARP Station ID• Duplex Mode• Hands Free• Group 1 Address MapEnter here the BARP system ID of this master station. The ID is used from theclients to identify the source of the control messages in multimaster environment.Default is “1001”.Choose the desired mode of operation.Default setting is "Full".When set to yes, and HDX mode is enabled, the talk/listen mode can be voicecontrolled while the ICMASTER is in active call. If the voice level exceeds the oneset in "Input Trigger Level", the master is switched in talk mode, and the client inlisten mode. The behavior for paging is also changed: the Page key needs to bepressed once (instead of press and hold) to activate Paging mode, and pressedagain to stop.Default setting is "No".Allows to set up the first group (1) of destination targets. Click related“View/Modify” button to setup the group. A label on the right shows the number ofselected clients in this group.Default setting is "id’s 1 to 10 selected".14 Running ICMASTER