ICPAGING Application User Manual - Barix

3.4.2.5 Background MusicConfigures the number of seconds after which the client will stop ringing if themaster is not responding. Minimum value allowed is 3, maximum is 60. Makesure this value is greater than the unattended mode timeout set for theICMASTER, otherwise the ICCLIENT will not get the unattended message fromthe ICMASTER.Default: "20".• BGM Broadcast AddressEnter the broadcast/multicast address of the background music streaming server.If set to “0.0.0.0” then broadcast is used.Default setting is "0.0.0.0".• BGM First Broadcast PortEnter the broadcast/multicast port of the first channel background musicstreaming server. The BGM streaming could be provided by multiple streamers,but they have to be configured to use consecutive port numbers. If set to "0", theBGM functionality is disabled.Default setting is "11001".• BGM Available Channels• BGM Start Channel3.4.2.6 Serial• Serial Port3.4.2.7 I/O ControlEnter the number of the available background music channels. If set to "0" andno local streamer is defined, then no BGM will be played.Default setting is "0".Enter the background music channel to start playing after a reboot. If it more thanthe available channels, it is assumed to be "0" (No BGM at startup)Default setting is "0".Selects the way the device serial port will be used. Select “VSC Panel” here touse Barix VSC accessory with this application.Default: Intercom Client Software.• Relay 1 ControlSet here the default relay behaviour. Available values are:"always off" - the relay is off in all states (idle,BGM playback,paging and intercom);"on while in a call" - the relay is normally off, but when the client is in intercomstate, the relay automatically switches on;26 Running ICCLIENT