1926-1984 Vintage Models - S&S Cycle

1926-1984 Vintage ModelsFlathead Power ® by S&S ®Valve Spring Covers (Tins)For 1938-’47 Big TwinsFlathead Power rocker arm cover "tins" are redesigned for better performance, butretain a relatively stock appearance. The lower covers are actually made of die-castaluminum, and instead of being held in place by the valve guide, they are held downby valve spring pressure. A special gasket on the bottom of the lower "tin" and oneo-ring provide a positive seal, and is much easier to service than the stock tins, since thevalve guides do not have to be pressed out in order to remove the lower covers. Also,S&S has improved the design of the oil return lines for better reliability and easier repairand maintenance.Lower covers are black anodized for a stock appearance, and steel top covers areavailable in gloss black powdercoat, silver powdercoat, and chrome finishes. FitsFlathead Power lower covers only.Top covers and lower covers are available in kits and must be purchased separately.Kits include gaskets and mounting hardware. Parts are designed to work together, notcompatible with stock tins.Fitment• 1938-’47 big twins• KN-Series enginesFeatures and benefits• Improved design for better oil scavenging and less leaking• Die-cast lower covers can be removed without pressing out valve guides• Improved oil return lines are easy to replace and service• Relatively stock appearanceOptions• Chrome, silver powdercoat and gloss black powdercoat finishesKit Contents• Lower cover kit contains set of four lower covers, hardware and gaskets• Top cover kits contain four top covers and gaskets• Oil return lines must be purchased separatelyPart numbersFlathead Power Valve Spring Cover KitsLower Cover KitBlack anodized ..........................................106-2401Top Cover KitChrome ................................................106-2400Gloss black powdercoat ..................................106-2893Silver powdercoat .......................................106-4346Oil line return 1936-'47 OHV BT (Flathead Power® Tins Only)Kit of 4 .................................................106-4446Front Intake ............................................106-4447Front Exhaust ...........................................106-4448Rear Intake .............................................106-4449Rear Exhaust ............................................ 106-4450Seal, Oil Return Line, 28" OD x .18" ID x 1", Rubber Hose ........106-4456106-2893Top Covers106-2401Lower CoversPERFORMANCEPARTSParts forTwin Cam 96 /103 2007-2012Parts forTwin Cam 88 ®1999-2006Parts forEvolution ®1984-1999Parts forSportster ® & Buell ®1986-2012Parts forVintage Engines1926-1984Parts forX-Wedge®2007-2012Parts forVictory®, Off-road& MetricRacingProductsTools & ShopSuppliesDealer Services& Promo ItemsWarranty &Company PolicyOEM Cross ReferenceAppendix & IndexVisit us at www.sscycle.com5-65