Emulation Command Set Reference Manual - Hengstler GmbH

XPM Emulation Command Set Reference2 Printer Command Overview (Emulation)Each command is explained using the following conventions:[Name] Command name[Function] Function of command[Code] Control code represented in hexadecimal or decimal notation.[X] 16 Hexadecimal notation (‘0’..’9’, ‘A’..’F’)[X] 10 Decimal notation (‘0’..’9’)[X] 2 Binary notation (‘0’..’1’)[Description] Explanation of command function2.1 Firmware Feature CodeThe XPM family of thermal printers is offered with either a Basic or an Advancedfirmware set. Some commands listed in this manual function only with the Advancedfirmware set, and are marked “Advanced Firmware Set only”.To determine if your printer has the Advanced or Basic firmware set, look at the shortprintout that is generated when paper is loaded. In the section under “PRINTER”,locate the field “FEATURE CODE”. This code shows 8 digits. If the 5 th digit is a “0”,then the printer has the advanced firmware set. If the 5 th digit is a “1”, then the printerhas the Basic firmware set. See example below.This “1” character indicates limited print speedFEATURE CODE : [00011000]This “1” character indicates basic firmware setPart No. D 690 004 Page 10 of 112 Mod.Nr. 4 240512 HOR1