Emulation Command Set Reference Manual - Hengstler GmbH

XPM Emulation Command Set Reference2.2.10 Line spacing setting ESC ‘A’ [n][Name]Line spacing setting[Function] This command sets the line spacing to a specific amount of dot lines.[Code] [1B] 16 [41] 16 [n][27] 10 [65] 10 [n][Description]1. Command „ESC ‘A’ [n]“ sets the line spacing to [n] dot lines.2. Condition [0] 10 ≤ [n] ≤ [255] 10 must be satisfied.3. If this command is set two or more times for the same line, the last set line spacing is valid.4. When line pitch is set with command „ESC ‘3’” or „ESC ‘2’”, the line spacing set with thiscommand is invalidated.5. Please note that “line spacing” is defined as the distance from the bottom of one character line tothe top of the next character line. Note the difference between line pitch and line spacing:LinePitchLINE 1LINE 2LineSpacingPart No. D 690 004 Page 22 of 112 Mod.Nr. 4 240512 HOR1