Emulation Command Set Reference Manual - Hengstler GmbH

More documents

Recommendations

Info

XPM Emulation Command Set Reference2.2.1 Horizontal tab TAB HT[Name]Horizontal tab[Function] This command moves the printing position to the next horizontal tab position.[Code] [09] 16[9] 10[Description]1. Command “HT” moves the printing position to the next tab position.2. The horizontal tab positions are set with command „ESC ‘D’ ”.3. If the next horizontal tab position is not set, the HT command is ignored.4. If the next horizontal tab position is outside the printing area, the printing position is shifted to thenext line.Part No. D 690 004 Page 12 of 112 Mod.Nr. 4 240512 HOR1
XPM Emulation Command Set Reference2.2.2 Line feed LF[Name][Function]Line feed[Code] [0A] 16This command prints the data already contained in the print buffer, then sets thenext-data receive position at the left most column on the next line.[10] 10[Description]1. Command “LF” prints the data already contained in the print buffer, then sets the next-datareceive position at the leftmost column on the next line.2. In the initial state, the line spacing is set to approx. 1/8 inch.3. When there is no data in the print buffer, only a line feed operation is executed.4. When different-height character typefaces are to be printed on the same line, these charactertypefaces are arranged so that their bottom ends are aligned at the same level.5. If line spacing during printing/line-feeding is shorter than the character height, a length equal tothe character height feeds the paper.Part No. D 690 004 Page 13 of 112 Mod.Nr. 4 240512 HOR1
Page 8 and 9: XPM Emulation Command Set Reference
Page 62 and 63:
XPM Emulation Command Set Reference
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112:
show all

Emulation Command Set Reference Manual - Hengstler GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?