Emulation Command Set Reference Manual - Hengstler GmbH

XPM Emulation Command Set Reference2.2.47 Position stamp feed ESC [F2] [05] [02] [n1] [n2][Name][Function]Position stamp feedThis command initiates a forward feed to an offset relative to the latest positionstamp[Code] [1B] 16 [F2] 16 [05] 16 [02] 16 [n1] [n2][27] 10 [242] 10 [5] 10 [2] 10 [n1] [n2][Description]1. Command „ESC [F2] [05] [02] [n1] [n2]“ feeds paper in the forward direction to an offset relative tothe latest position stamp set.2. Parameter [n1] and [n2] specifies a target position in millimetres from the latest position stamp.Together they form a 16-bit, unsigned integer with a valid range up to 65,535. Parameter [n1] isthe MSB and parameter [n2] the LSB of this value.3. Condition [0] 10 ≤ [n1] ≤ [255] 10 and [0] 10 ≤ [n2] ≤ [255] 10 must be satisfied.4. Buffered print data will be printed before the printer processes this command.5. The position stamp feed command will have no effect when the requested position has alreadybeen passed.6. By using the “position stamp set” command at start of a printout and the “position stamp feed”command at the end of the printout, an application is able to assure a minimum printout length.Part No. D 690 004 Page 84 of 112 Mod.Nr. 4 240512 HOR1