Emulation Command Set Reference Manual - Hengstler GmbH

More documents

Recommendations

Info

XPM Emulation Command Set Reference9. The status parameter [m] can also be set via the Set Status Parameter command. See the SetStatus Parameter section for a more detailed discussion of how this parameter is used.Part No. D 690 004 Page 30 of 112 Mod.Nr. 4 240512 HOR1
XPM Emulation Command Set Reference2.2.18 Horizontal tab positions ESC D [d1] ... [dn] NUL[Name][Function]Sets Horizontal tab positionsThis command sets one or more horizontal tab positions or deletes all tabpositions.[Code] [1B] 16 [44] 16 [d1] .. [dn] [00] 16[27] 10 [68] 10 [d1] .. [dn] [0] 10[Description]1. Command „ESC ‘D’ [d1] ... [dn] NUL” sets one or more tab positions, which are used by thehorizontal tab command “HT”.2. The following conditions must be satisfied for the values of d1, d2, etc. (tab position).XPM-80 / 203 dpi Printer: [1] 10 ≤ [d] ≤ [80] 10XPM-200 / 203 dpi Printer: [1] 10 ≤ [d] ≤ [200] 10XPM-200HR / 300 dpi Printer: [1] 10 ≤ [d] ≤ [200] 103. The maximum number of tabs that can be set it 32. Therefore, the condition [1] 10 ≤ [n] ≤ [32] 10must be satisfied. Any data sent after the 32 nd horizontal tab position will be treated as ordinarydata.4. The horizontal tab position is set to [d] x 8 dots distant from the head of the line in the printingarea.5. When the horizontal tab is set with this command, all horizontal tab positions previously set aredeleted. Therefore, to add a tab, it is necessary to resend all the previous tab locations along withthe new tab location.6. The [d] values must be entered in ascending order, and the data string must end with NUL ([0] 10 ).7. All horizontal tab positions can be deleted with command „ESC ‘D’ NUL”.8. When the power to the printer is cycled or the printer is reset, the horizontal tab positions are setto intervals of 8 default characters as selected during initialization.Part No. D 690 004 Page 31 of 112 Mod.Nr. 4 240512 HOR1
Page 8 and 9: XPM Emulation Command Set Reference
Page 80 and 81:
XPM Emulation Command Set Reference
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112:
show all

Emulation Command Set Reference Manual - Hengstler GmbH

Create successful ePaper yourself

Delete template?

Save as template?