FILARC flux - Esab

More documents

Recommendations

Info

FILARC flux- andmetal- coredwelding wiresFILARC PZ6152PZ6352DIN8555 : MF1-300PContents page 4DESCRIPTIONWELD METAL COMPOSITIONPrevious pageNext pagePZ 6152 (metal-cored) and PZ 6352(rutile, self-shielding) yield a depositwith a hardness of Hv 280-350 orHv400 after quenching. They are suitedfor repairing and building-up ofrelatively soft components prior todepositing a highly wear resistantlayer. An unlimited number of layerscan be welded without risk of cracking.The deposit is highly resistant toheavy shocks and has a moderatewear resistance. Because of thehomogeneous structure of the weldmetal, the wires are very suitable formetal to metal wear applications.These wires are successfully employedfor building up shovels, scrapers,hammers, wagon wheels, tractorsprockets, idler shaft and spindles.C : 0.15-0.25%Si : 0.30-0.50%Mn: 0.70-1.20%Cr : 1.80-2.20%SHIELDING GASPZ 6152: CO 2 and Ar/20%CO 2EN 439: C1, M21PZ 6352: none (self-shielded)POSITIONSDEPOSITION DATA IN: CO 2 and Ar/20%CO 2Ø 1.6Diameter1.6mmStickout20mmI V wire Dep. rate[A] [m/min] [kg/h]150 2.4 1.8250 4.5 3.4350 8.4 6.3450 11.9 9.0Diameter2.4mmStickout25mmI V wire Dep. rate[A] [m/min] [kg/h]250 2.5 3.7350 4.2 6.0450 6.8 9.0550 9.0 11.4HARDNESSHardness of 3 rd layer:Hv : 280-350HRC: 27-36CURRENTANDPOLARITYDC +104
FILARC flux- andmetal- coredwelding wiresFFILARC PZ6153PZ6353DIN8555 : MF1-45Contents page 4DESCRIPTIONWELD METAL COMPOSITIONPrevious pageNext pageBoth PZ 6153 (metal-cored) and C : 0.15-0.25%DEPOSITION DATA IN: CO 2 and Ar/20%CO 2PZ 6353 (rutile, self-shielding) yield adeposit with a hardness ofHv 425-550, which is resistant both toSi : 1.10-1.40%Mn: 5.0-6.0%Cr : 0.20-0.40%moderate shocks and abrasion. Initialhardness is not affected by repeatedheating of the weld metal, so wellsuited for workpieces that are heattreated after hardfacing. Also appliedfor building-up prior to depositinglayers with a higher hardness.These wires are successfully appliedfor hardfacing articulated tracks,SHIELDING GASedges of bulldozer blades, sprocketwheels, pneumatic equipment, anvils, PZ 6153: CO 2 and Ar/20%CO 2wheel flanges, transport rollers for hotEN 439: C1, M21works, crankshafts etc.PZ 6353: none (self-shielded)POSITIONSDiameter1.6mmStickout20mmI V wire Dep. rate[A] [m/min] [kg/h]150 2.4 1.8250 4.5 3.4350 8.4 6.3450 11.9 9.0HARDNESSHardness of 3 rd layer:Hv : 425-550HRC: 43-52CURRENTANDPOLARITYDC +105
Page 1 and 2:
FILARC flux- andmetal- coredwelding
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56: FILARC flux- andmetal- coredwelding
Page 105: FILARC flux- andmetal- coredwelding
show all

FILARC flux - Esab

Create successful ePaper yourself

Delete template?

Save as template?